Description
- Relay Switch Support Max Current: 20A
- Standby Current: 10mA
- Working Current: 135mA
- Support Receiver voltage: 5V
- Size: 41mm*16mm*14mm
- Net Weight: 13g
Only 5V voltage receiver is supported, otherwise the module may be damaged. If the receiver and the servo are using a high voltage system, the module should be added with a buck module.
One channel servo signal input, control one way electronic switch.
One way LED indicates working status.
With boot protection, easy to operate.
Input channels do not need to be calibrated, compatible with all brands of remote control devices.
Application
- Remote control model rocket launch
- Remote control model smoke control
- Weapon system control like real machine
- Smoke control of the model aircraft
- Control of various remote switching systems
- Switch the signals of the two cameras
- Control the opening and closing of various electrical power sources, such as navigation lights, searchlights, strobe lights, buzzers,water pump etc.
- Control the camera shutter or switch the camera's recording and camera mode.
How to use:
1. Connecting
Plug the signal cable into an idle receiver channel that corresponds to a switch on the remote.
The power indicator will be lighted when connected to the receiver.
The work indicator lights up when the switch channel is open and vice versa.
2. Working mode
The red LED light is a power indicator.
A green LED indicates the relay's operating status.
-- Specification & Features --
* Relay Switch Support Max Current: 20A
* Standby Current: 10mA
* Working Current: 135mA
* Support Receiver voltage: 5V
* Size: 41mm*16mm*14mm
* Net Weight: 13g
-- Package Inlcudes --
2 piece of RC Model Receiver Control Switch 20A Relay