Description
The goBILDA 2000-0025-0002 is a descendant of the popular 2000-0025-0001 servo. The 25-2 received some noteworthy updates including an ultra stout steel gear train, more torque and a new top case. Like its predecessor, the 25-2 boasts two different modes which allow it to fill a variety of roles on your robot or project. In the default mode, the servo is able to rotate 280 degrees while having positioning feedback. In this mode, the PWM signal will determine the position of the servo. Using the 3102 Series Dual Mode Servo Programmer (1-1) the servo can be toggled into continuous rotation mode. In this mode, the servo will have proportional speed control based on the PWM signal that you send with your servo controller. Product Weight: 60g Output Shaft Style: 25 tooth (H25T) spline Voltage Range: 4.8V - 7.4V No-Load Speed: (4.8V)0.25sec/60 (40RPM) No-Load Speed: (6.0V)0.20sec/60 (50RPM) No-Load Speed: (7.4V)0.16sec/60 (60RPM) Stall Torque: (4.8V)240 oz-in (17.2 kg.cm) Stall Torque: (6.0V)300 oz-in (21.6 kg.cm) Stall Torque: (7.4V)350 oz-in (25.2 kg.cm) Max PWM Signal Range: (Standard)500 - 2500sec Max PWM Signal Range: (Continuous) 1000-2000sec Travel per s (out of box): 0.15/sec Max Travel (out of box): 300 Pulse Amplitude: 3-5V Current Drain - no-load: (4.8V)150mA Current Drain - no-load: (6V)160mA Current Drain - no-load: (7.4V)200mA Current Drain - stall: (4.8V)2,000mA Current Drain - stall: (6V)2,500mA Current Drain - stall: (7.4V)3,000 mA Direction w/ Increasing PWM Signal: Clockwise Deadband Width: 4 sec Motor Type: Brushed DC Internal Feedback Style: 5K Potentiometer Output Shaft Support: Dual Ball Bearing Gear Material: Steel Wire Length:11.81" (300 mm) Wire Gauge: 22 AWG Connector Type: 3-Pos TJC8 Servo Connector [MH-FC] Gear Ratio: 300:1