Description
- Compatible with(3.175mm) Shaft Size Motors,make sure your RC motor shaft have the same diameter.
- Spec48 Pitch,28T 29T 30T 31T 32T
- Suit forworks with 1/16 E-Revo Slash VXL,1/10 Rustler VXL,Stampede VXL,Slash VXL 2WD Ford F-150 Raptor Ford Mustang GT.Associated Losi Redcat ECX Arrma Trx4 Axial HSP Redcat 1/10 Rc Car etc.
- MaterialMade of Hardened Steel to increased wear resistance and improve fatigue life,make them roll smoothly, it will work with the steel spur gear. did not work with plastic or aluminum spur gear
- Package48p 28T 29T 30T 31T 32T pinion gear and a hex key
Description:
Hardened steel to increased wear resistance and improve fatigue life
Nitrided to enhanced hardness corrosion resistance
Tooth count: 28T 29T 30T 31T 32T
Tooth pitch: 48 pitch
length: 9mm
For shaft: 3.175mm
Package include:
1 X 48p 28T pinion gear
1 X 48p 29T pinion gear
1 X 48p 30T pinion gear
1 X 48p 31T pinion gear
1 X 48p 32T pinion gear
5 X Screws
1 X Hex Key
Make sure you thread lock the grub screw. They are hard to find when they fall out.
Larger gears will result in higher speeds while smaller gears provide more torque.
For quicker acceleration go for a smaller pinion gear (with fewer teeth) and larger spur gear (with more teeth).
Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC.
How to install the pinion gear:
You will probably need to loosen the motor a bit, in order to fit the pinion gear on. Make sure you lock it in place on the flat portion of the motor shaft.
When you are tightening it back up, make sure you leave about a gap between the pinion gear and the spur gear. That gap will be very small. It should be about the thickness of a piece of paper.