Description
- >> Hit and Miss Engine: A hit-and-miss engine is a type of four-stroke internal combustion engine that is controlled by a governor to operate at a set speed.
- >> Horizontal Engine: This horizontal gas engine looks unique. The water cooling stirling engine with wooden base for easy placement and operation. You will love this exquisite horizontal gasoline engine model
- >> Parameters: Engine size: 180 x 125 x 75mm. Size of wooden base: 180 x 66 x 50mm. Cylinder diameter: 22mm. Stroke: 20mm. Revolution: 1200rmp/min. Power supply: 3.7v. Fuel: gasoline
- >> High Quality: The gasoline engine is elaborately made of all metal, and the surface is polished to make it very smooth. The engine is fixed on the wooden base, the structure is stable and reliable
- >> Collection or Gift Choice: As a coveted collection, the engine model is worth showing and playing, suitable for personal use and a high-end gift to friends and families at major festivals.
Engine Startup Steps:1, Open the bottom plate to check the wiring of the engine, connect the fuel tank pipe, and install the three No. 5 batteries to close the bottom plate.2, Fill the fuel tank with gasoline (95). When the filling is completed, make sure there is no air in the oil pipe.3, On the right side of the engine, slowly turn clockwise to buy more than one turn, its role can make the mixed gasoline fully enter the cylinder.4, Turn on the power switch and turn the flywheel clockwise to start the engine clockwise on the right side of the engine.Note:1, If the ignition device is normal and the cylinder is under normal compression, if the machine still does not start normally, it is very likely that the carburetor needle should be adjusted.2, screw the screw on the top of the carburetor, then loosen 1/4 turn, start the flywheel, This can be done several times to make the mixing ratio of gasoline and air reach the normal working mix ratio.3, Check if the water tank lacks water. If there is air in thecooling pipe, the pump can't work normally. Need to loosen the water pump outlet screw. Turn the engine to exhaust. When it is normal, the water is pumped out. Screw the screw.4, When the machine stops, the power switch should be turned.Specifications:.Color: As Shown.Material: Metal + Wood.Product Size: 18 x 12 x 12.5cm.Product Weight: 1900g.Package Dimensions: 25.5 x 25.5 x 25.5cm.Package Weight: 2028g.Packing: BoxPackage Content:.1 x Gas Engine Model.1 x Hand Start Device