Description
Three innovative functions:
1) Controller sets the emergency brake mode and the ABS brake mode, the ABS braking mode to avoid the tire and road skid caused by the aircraft off the runway, avoid the aircraft head down, and reduce the damage to the landing gear structure. Therefore, it also applies to the aircraft of the latter three points including the World War II aircraft used.
2) Brake core uses silicon rubber material as brake pad, brake force is large, and the brake force of left and right wheels is uniform without deviation. Brake pads are wear-resistant and high-temperature resistant, and can work normally in a high-temperature state of more than 120 degrees Celsius after testing.
3) There are brake lights on the wheels to let you see more clearly whether the brakes are working.
Brake wheel spec.:
Brake core Power: 2S: 270mAh, 3S: 400mAh (each)
Brake core Cable: 800mm
Brake light: red LED
Weight: 71g (each)
Tires Axle: 4mm or 5mm (selectable)
Note: 4mm tire axle is delivered by default. If 5mm tire axle is required, please note on the order.
Controller features:
Signal line can be connected to the reset channel or AUX channel or your preference channel.
Controller sets emergency brake mode and ABS brake mode, which can be selected by jumping pin on PCB.
Emergency brake mode and ABS brake mode are respectively displayed by two blue LED, while power output is displayed by a red LED.
Output current is limited to 1A to prevent controller and battery damage due to unexpected short circuit of brake circuit.
Controller spec.:
Input voltage: DC7.4-16.8V (2-4S lipo)
Output current: 1A (limited to 1A)
Power cable: 150mm
Signal cable: 200mm
Weight: 8g
Included:
2 x Brake wheels
1 x Controller
1 x JST 2P Female cable
1 x 3S balance plug special line
1 x Product manual
1) Controller sets the emergency brake mode and the ABS brake mode, the ABS braking mode to avoid the tire and road skid caused by the aircraft off the runway, avoid the aircraft head down, and reduce the damage to the landing gear structure. Therefore, it also applies to the aircraft of the latter three points including the World War II aircraft used.
2) Brake core uses silicon rubber material as brake pad, brake force is large, and the brake force of left and right wheels is uniform without deviation. Brake pads are wear-resistant and high-temperature resistant, and can work normally in a high-temperature state of more than 120 degrees Celsius after testing.
3) There are brake lights on the wheels to let you see more clearly whether the brakes are working.
Brake wheel spec.:
Brake core Power: 2S: 270mAh, 3S: 400mAh (each)
Brake core Cable: 800mm
Brake light: red LED
Weight: 71g (each)
Tires Axle: 4mm or 5mm (selectable)
Note: 4mm tire axle is delivered by default. If 5mm tire axle is required, please note on the order.
Controller features:
Signal line can be connected to the reset channel or AUX channel or your preference channel.
Controller sets emergency brake mode and ABS brake mode, which can be selected by jumping pin on PCB.
Emergency brake mode and ABS brake mode are respectively displayed by two blue LED, while power output is displayed by a red LED.
Output current is limited to 1A to prevent controller and battery damage due to unexpected short circuit of brake circuit.
Controller spec.:
Input voltage: DC7.4-16.8V (2-4S lipo)
Output current: 1A (limited to 1A)
Power cable: 150mm
Signal cable: 200mm
Weight: 8g
Included:
2 x Brake wheels
1 x Controller
1 x JST 2P Female cable
1 x 3S balance plug special line
1 x Product manual