Description
- Manufacturer Warranty
Connect a PC to a JAMMA cabinet in seconds! New Version! The J-PAC (JAMMA interface for Pc to Arcade Controls) is a board which allows plug-in connection of a JAMMA arcade cabinet to a VGA card and keyboard port or USB port on a PC motherboard. It incorporates all the advanced features of the I-PAC with an on-board JAMMA connector NEW VERSION! Now has inputs fully protected against static discharge and reverse connection, now supports 3 extra JAMMA connections (Tilt, Service SW and Test) Now supports 12 volt coin doors. Fully programmable key code set. Stored even after power off. Dual interface USB or Keyboard. Supports I-PAC optional pre-assembled LED harness with 3 panel mounting LEDs which emulate the keyboard Lights. Lead plugs into keyboard socket on PC or USB port. Self-Test LED gives an instant check of all your wiring. Can indicate which, if any, input has a problem. No separate power needed. Does not use a matrix - no ghost keys. All inputs are completely separate and generate their own interrupt - this is the fastest possible method. Does not use a scanning method which causes a variable delay. Either uses standard MAME keys or you can program your own character set. Shift functions. Holding "Start1" and pressing other buttons sends a range of codes for MAME functions such as "escape", "Coin 1", "tab", "enter". This means no extra buttons are needed on the cabinet. In programmable mode any input can be the shift key and all keys can be programmed with a shifted code. Connector for ordinary keyboard which can be used together with the controls if required.