Description
- Solid but Cheap: This robot car chassis T101 is very solid with 2mm iron. The car panel is metal, which is different from the plastic/acrylic, but the price is almost the same. This robot chassis is including 2pcs metal panel, 3pcs dc motor with encoder, 3pcs motor brackets, 3pcs omni wheels, and other screw kits.
- Convenient Use: The tank car chassis can be controlled by any other controllers, e.g., Arduino, Raspberry, STM32. When you get this chassis, you will code programming. After install the controller on this chassis, and connect to the controller board, the T101 robot tank car chassis will moving by the runtine based on the code programming.
- Good Help for Your Project: When you want to do some robot model function realization. This smart car chassis is very suitable for you. You just assemble the robotic model platform, and dont note the structure of the chassis. ONLY focus on the software code. It will give you a big help to build the project quickly.
- Updating Rich Documents: At the gitnova, you can find many installation document or referred source code. Then you will quickly let the robotics platform move quickly. It is a good choice for students robotic code programming. It is also the good choice for the students competition, software learning.
- Provide the Referred Controlling Example: We provide the illustrative controlling example with different wireless control modes: Bluetooth, WiFi, and ps2. Only built in the code to the Arduino controller board, then you can use the phone or ps2 to control the robot car chassis move. Later, can further optimize the code to get the better performance.
Product Parameters
Model: T101 Size: 19*16.5*5.7cm Weight: 0.53kg Track: plastic Motor: 6-12V Wheel: metal Frame Material: 2mm iron Surface treatment: sandblasting oxidation
Wheel Paramters
Driving Wheel Size: 48.03*31.85mm Bearing Wheel Size: 48*37mm Track: 52 joints
Motor Paramters
Voltage Range: 6v-12v No-Load Speed: 170-350rpm Rated Voltage: DC 12v No-Load Current: 100mA Motor Weight: 100g
Shipping List
Panel: 1pcs Motor: 2pcs Track: 2pcs Bearing wheel: 2pcs Driving wheel: 2pcs Screw: 1set
Reminder: Please be careful to your hand and body when installing the car chassis.
FAQ: Q: Where can I find the documents? A: The document can be find at OUR BLOG gitnova dot com, and there we have the refered source code for Arduino. Q: If the track is too long for the car, how to solve it? A: The track is connected one joint by one joint. So, the track can be adjusted any length by using some tools similar to the Tweezers. Q: What is the working voltage for the motor? A: The working voltage can be 6-12V. Q: How about the bearing load? A: The car is mainly used to the scientific study research. So the bearing load is not big, about 1-3kg. If need much big load, please contact us. Q: Which controllers are suitable for this car? A: Many controllers can be used to control this car, e.g., Arduino, Raspberry pi, STM32, Micro Bit, and so on.